3D Printing

All XNL Future Technologies 3D Printing projects will be listed in this (main) category.

Showing 1–20 of 28 results

  • 8-Bit Sophie The Pigeon Ornament & Keychain

    I decided to make a custom Christmas Ornament of Sophie’s (our pigeon) logo.

    This ornament can however also be used as a keychain :)

    Download: 28KB

  • 8-Bit Xmas Sophie The Pigeon Ornament

    I decided to make a custom Christmas Ornament of Sophie’s (our pigeon) Christmas logo (which is used as seen in the outro of her ‘pigeon vlogs’).

    There are two versions in this download: One facing left, and one facing right.

    Download: 56KB

  • Ceramic Frequency Screwdrivers Mount (8pcs)

    Just a simple desk/workbench/wall mount for the cheap Chinese (Yueran) Ceramic Frequency Screwdrivers. These are often sold as a set of 8, and are also sold under many different ‘brand names’

    Download: 282kb

  • Christmas Ornament Bow With Name

    I decided to make some custom Christmas Ornaments with Sophie’s (our pigeon) name on/in it.

    I however did not stop there and decided to make a lot more of them with names of our friends, family and Sophie’s online friend at her X page and her Instagram

    There are currently three designs, one with a bow (this one), the Classic Ornament and the Dog Themed Ornament.

    Bellow in the information you can find the list of names included in this single download.

    NOTE: There is also a blank ornament without name included so that you can edit it and add your own name (or your pet’s name)

    Download Size: 13MB

  • Christmas Ornament With Name Dog Themed

    I decided to make some custom Christmas Ornaments with Sophie’s (our pigeon) name on/in it.

    I however did not stop there and decided to make a lot more of them with names of our friends, family and Sophie’s online friend at her X page and her Instagram

    There are currently three designs, a Dog Themed Ornament (this one), an Ornament with Bow and the Classic Ornament.

    Bellow in the information you can find the list of names included in this single download.

    NOTE: There is also a blank ornament without name included so that you can edit it and add your dog’s name.

    Download Size: 1MB

  • Classic Christmas Ornament With Name

    I decided to make some custom Christmas Ornaments with Sophie’s (our pigeon) name on/in it.

    I however did not stop there and decided to make a lot more of them with names of our friends, family and Sophie’s online friend at her X page and her Instagram

    There are currently three designs, a Classic One (this one), an Ornament with Bow and the Dog Themed Ornament.

    Bellow in the information you can find the list of names included in this single download.

    NOTE: There is also a blank ornament without name included so that you can edit it and add your own name (or your pet’s name)

    Download Size: 16MB

  • Component Organizer Divider

    Just a simple printable divider for component storage cabinets, often also called: parts organizers, parts cabinets or in Dutch: assortimentskast & ladekast

    Size of my dividers: 51.50x30x2mm

    NOTE: I don’t remember the exact brand of my cabinet, so make sure to check the dimensions of your own dividers before printing these to ensure that these will fit your cabinet.

    Model: XNL-WST15722
    Download: 100kb

  • Desk Outlet Socket Protection

    Just a very simple (but effective) solution to close-off horizontally installed desk outlets .

    I designed this (simple) solution to protect our pet (rescue) pigeon Sophie against accidentally putting her feet into the desk sockets (which where obviously already installed there before we got her ;) )

    This is a simple 3D print of two parts (the closing cap and the ‘key’), both the key and the cap(s) take a 10x3mm neodymium magnet.

    Download: 85kb

  • Fallout® Airbrush Stencil – Vault 101 Door

    This is a simple Airbrush stencil of the Vault 101 Vault Door I’ve made which was initially only intended for my own (one-time) use, because I wanted to make some simple ‘Fallout® Themed Candles’ to go along with our other (Fallout®) Christmas decorations :)

    There are additional instructions in the readme.txt in the download on how to use the stencil (because it’s a bit different from using the ‘regular airbrush stencils ;) )

    Download Size: 77KB

  • Fallout® Airbrush Stencil – Vault 13 Door

    This is a simple Airbrush stencil of the Vault 13 Vault Door I’ve made which was initially only intended for my own (one-time) use, because I wanted to make some simple ‘Fallout® Themed Candles’ to go along with our other (Fallout®) Christmas decorations :)

    There are additional instructions in the readme.txt in the download on how to use the stencil (because it’s a bit different from using the ‘regular airbrush stencils ;) )

    Download Size: 78KB

  • Fallout® Airbrush Stencil – Vault-Tec Logo

    This is a simple Airbrush stencil of the Vault-Tec Logo I’ve made which was initially only intended for my own (one-time) use, because I wanted to make some simple ‘Fallout® Themed Candles’ to go along with our other (Fallout®) Christmas decorations :)

    There are additional instructions in the readme.txt in the download on how to use the stencil (because it’s a bit different from using the ‘regular airbrush stencils ;) )

    Download Size: 52KB

  • Fallout® Ornament – Vault 101 Door

    A simple Christmas Ornament of the Fallout® Vault 101 Door  I’ve created to compliment my/our own Fallout® collection during the holidays.

    It is intended to be 3D Printed and then hand painted, however there are some additional tips in the readme.txt file (in the download) to print it in two colors (changing filament mid-print) to make the painting process a bit easier :)

    Download Size: 70KB

  • Fallout® Ornament – Vault 111 Door

    A simple Christmas Ornament of the Fallout® Vault 111 Door  I’ve created to compliment my/our own Fallout® collection during the holidays.

    It is intended to be 3D Printed and then hand painted, however there are some additional tips in the readme.txt file (in the download) to print it in two colors (changing filament mid-print) to make the painting process a bit easier :)

    Download Size: 58KB

  • Fallout® Ornament – Vault 13 Door

    A simple Christmas Ornament of the Fallout® Vault 13 Door  I’ve created to compliment my/our own Fallout® collection during the holidays.

    It is intended to be 3D Printed and then hand painted, however there are some additional tips in the readme.txt file (in the download) to print it in two colors (changing filament mid-print) to make the painting process a bit easier :)

    Download Size: 73KB

  • Fallout® Ornament – Vault Boy

    A simple Christmas Ornament of the Fallout® Vault Boy I’ve created to compliment my/our own Fallout® collection during the holidays.

    It is intended to be 3D Printed and then hand painted, however there are some additional tips in the readme.txt file (in the download) to print it in two colors (changing filament mid-print) to make the painting process a bit easier :)

    Download Size: 151KB

  • Fallout® Ornament – Vault Girl

    A simple Christmas Ornament of the Fallout® Vault Girl I’ve created to compliment my/our own Fallout® collection during the holidays.

    It is intended to be 3D Printed and then hand painted, however there are some additional tips in the readme.txt file (in the download) to print it in two colors (changing filament mid-print) to make the painting process a bit easier :)

    Download Size: 131KB

  • Hakko Soldering Tip Storage (wall/desk mount)

    A simple and elegant way to store up to 5 soldering tips for your Hakko® soldering iron.

    This design is intended to be installed onto a wooden plate/wall of your workshop or desk.

    When printed in two colors (switching filament mid-print) you can even make it match your Hakko® soldering Iron perfectly when using blue and yellow as filament colors.

    Download: 40KB

  • PCB Holder Workbench Mount (upside down mount!)

    Just a simple desk/workbench/wall mount for my (cheap) PCB Holder so it always have it within reach when I need it (see example photos).

    Download: 29kb

  • Sony FDR-AX33 Bottom Plate Replacement (3D Print)

    This is a 3D printable replacement bottom plate for the Sony® FDR-AX33. Especially intended for those who are having the same issues as we are having with almost all of our Sony® camera’s: The tripod mount screw breaking out of the base/bottom plate.

    For more information and why I decided to make a replacement part myself, please read bellow :)

    DOWNLOAD NOTE:
    This download contains a .obj file! NOT an .stl (which I usually use), but most (if not all) slicers will be perfectly able to slice it :)

    Download: 77kb

  • Sophie The Pigeon Egg (and Nest) Ornament

    Sophie’s Ornament for this year (2025) is an Egg with Sophie coming/sticking out of it on the side.

    The Egg Ornament also comes with a printable nest, which you can use as a stand. Not only is this ornament perfect for in your Christmas tree, you can also use it as Easter decoration or even as a small ‘pigeon art trinket’ to put up for display the rest of the year 😊

    This ornament is intended to be hand painted for optimal results (wings, stripe underneath her eye, eyes and the beak).

    Download: 2.6MB