XNL Communication Boards

All the XNL Communication boards, including but not limited to RS-232, USB to serial, data/logic ‘interception’ boards, and wireless (remote control style) boards/kits.

Showing all 6 results

  • ESP Direct Adapter (for LABUNO)

    This mini “board” is officially part of the XNL LABUNO Panelized version (which is included in the XNL LABUNO Download), and it is only provided as separate ‘project’/download for reference.

    You do not need this board!
    Literally! You DO NOT need this board ;) you can achieve EXACTLY the same with two (female-female) jumper wires! Please read the additional information section for more information.

    “Multi Pack” NOTE:
    The (NON USB) XNL LABUNO download also contains a panelized version of the XNL LABUNO which includes two XNL Logic Monitors, an XNL ESP Direct Board, and an XNL WESP Board which means that it might actually be cheaper to order the panelized version (if your PCB Manufacturer allows pre-panelized boards) if you need or want all modules.

    Download Size: 440kb

  • XNL F.U.T.S. – Full USB to TTL Serial Adapter

    The XNL F.U.T.S. is ‘our answer’ to a problem we personally had quite a few times: Finding a decent USB to Serial/UART board which either just works, and/or had more than just the RX, TX and RTS available.

    The XNL F.U.T.S. stands for Full USB to TTL Serial Adapter, and it basically is a serial adapter/board which gives you a full USB serial port including ALL serial pins including: RX, TX, RTS, CTS, DTR, DSR, DCD, and RI (and of course VCC and ground).

    The XNL F.U.T.S. uses the CH340G IC, of which the drivers can be downloaded here.

    Download Size: 1.2MB

  • XNL Logic Monitor Module (for LABUNO and LABUNO USB)

    The XNL Logic Monitor is a small ‘add-on’ for the XNL LABUNO and XNL LABUNO USB which can add an RX and TX LED for the UART (Serial) ports of the LABUNO’s.

    The XNL LABUNO’s don’t have their own RX and TX LED’s “onboard” to keep the ‘lines as clear as possible’. Therefor we also decided to use the ‘opamp method’ to ensure minimal ‘additional load’ on the (data) lines.

    These boards can be used for both the hardware and/or software serial ports of the LABUNO’s

    “Multi Pack” NOTE:
    The (NON USB) XNL LABUNO download also contains a panelized version of the XNL LABUNO which includes two XNL Logic Monitors, an XNL ESP Direct Board, and an XNL WESP Board which means that it might actually be cheaper to order the panelized version (if your PCB Manufacturer allows pre-panelized boards) if you need or want all modules.

    Download Size: 645kb

  • XNL Mini SIM Adapter

    The XNL Mini SIM Adapter is a very simple to assemble product which will make it very easy to interface directly with (mobile) SIM Cards on your breadboard.

    Perfect for when you are building a SMS, GPRS, 3G, 4G or other ‘Mobile Telecom’ project on your breadboard with a module which doesn’t have it’s own SIM Card slot.

    NOTE:
    This project/product has no datasheet/manual in the download! The instructions are listed bellow in the information tabs.

    Download Size: 123kb

  • XNL SpySIM

    Ever “needed” to hook-up some wires to the ‘SIM Card Socket’ of a mobile phone for one of your ‘Sketchy Projects’, but didn’t wanted to solder wires onto the ‘pins’?

    Well then maybe this little board might be just what you need for those ‘sketchy SIM Port Projects’ ;)

    Download Size: 17kb

  • XNL Wesp (ESP8266 WIFI)

    The XNL WESP is our (simple) solution to work with the ESP-12E boards using our XNL LABUNO’s. It basically ‘converts’ your ESP-12E modules into a ‘mini development board’ when used in combination with our LABUNO’s.

    This is however not a full (stand-alone) development board, officially put this is ‘just a breakout board’!

    NOTE: The download for the XNL WESP also contains the official datasheet of the ESP-12E

    “Multi Pack” NOTE:
    The (NON USB) XNL LABUNO download also contains a panelized version of the XNL LABUNO which includes two XNL Logic Monitors, an XNL ESP Direct Board, and an XNL WESP Board which means that it might actually be cheaper to order the panelized version (if your PCB Manufacturer allows pre-panelized boards) if you need or want all modules.